Видео

Amazing, thank you so much for the short and to the point tutorial!

Hi did you made that video about PWM module connection and configure with all settings in mach (port setting for this rnr board)

what is the name of the machine?

thank you very much for this structured introduction. keep teaching this way.

I see the mesh on your image but did you employ it and place it on the face you are creating the text on?

But does it actually print correctly?

Sorry, got to this 1 and Im already sick of unnecessary spreadsheets, which you shouldnt have to do for all these exercises.

If you are doing a large part design which is only going to be a 1 of, with no possiblity of any changes, ie sizes, this parametric would be a waste of time, wouldnt it?

A 21:44 length tutorial video and it only at least eight hours to get it right.

No need for a primer if using Polyfilla, correct? Any thoughts on using just nail polish for small surfaces like eyeballs only?

I finally got an understanding about forms, thank you!

Hello Garath, nice CNC build and good to see you completed the project. For me the most interesting bit is the control aspect, the bit between the software and the actual CNC motion mechanics. There are many presenters for CNC builds and software, however not many delve into the Microcontrollers. It seems to me you have a talent for explaining and have sound knowledge of Microcontrollers. Will you be expanding your presentations with regard Microcontrollers in the future, e.g. STM32, ESP32, Arduinos etc? I hope you do as the Engineering of motion control is the important part of these types of project, please let me know and thanks for the good work. Jo

Hi , thank you for that , it was really easy to follow & has given me a clear understanding .

Ive just bought a 3d printer and just endured 4 painfully confusing vids to the point i nearly gave up. (And why do i have to listen to their life story before they start? 😴 ) Yours is a breath of fresh air. Made simple and to the point without spinning your cursor over the screen until i feel sea sick! Cheers.

TY, you hero

WARNING: This is OBSOLETE. Find a newer explanation of how to do this.

Thank you!

What a fantastic build, can I ask you which RGB LED you have fitted?

Thank you for such detailed and clear instructional videos! I’m a technician in a school retrofitting a 6090 cnc machine that’s been dormant for 8 years. Following your videos I’ve been able to get my head around the components and update the machine to get all the axis working via Mach 3, so thanks! Regarding the PWM converter and relay board - is the current ‘stop, start forward reverse, Mach 3 control’ working separately to the PWM converter? Or routed through the PWM converter from the Mach 3 board?

Great, thank you! 🎉

Amazing guide brother, keep it up.

Training is a little out of date, is there an updated version or will the changes not be too drastic over the last 4 years?

How did I bend the text ?

I would like to see a full detail of the spindle tuning.

No comment, question, i am trying to use FreeCad 21.4 the problem is that i do not get an immediate response to what i have drawn i have used other programs and the response was immediate does anyone reading this have an answer by the way great tutorial

This is the BEST FreeCAD tutorial series i've come across, amazing job and an outstanding contribution to make FreeCAD better by growing its user base

Just ordered my X1C a few days ago can’t wait to receive it!

thankss i forget the analysis folder

Thanks! How can I mirror if the reference plane is offset from the body?

Thats awesome!

A thermometer before/after would help assessment.

This is scary good. So helpful. Easy to understand with excellent delivery. We need More More and then More

Great subject choice and very helpful delivery. Thank you for sharing

Your motor drivers appear to be daisy chained (red wire at the bottom of each one). Each red wire should be run to a terminal block instead. Also, the braided shielding of each cable in the enclosure should be soldered to a wire (ground drain) and all joined to a grounding bus bar. Corvetteguy50 covers this really well in several of his videos. You can also add noise supressor power EMI filters to power the VFD and the power supplies.

Watched 2min. Best FreeCad teacher that I ever seen

I'm curious, why didnt you use end switches for axis limitation? Im currently designing my own machine, but am sure I will use them for some security. Now you can only rely on the software to not have mistakes in the configuration and gcode.

Good stuff

The colors are absolutely horrendous yuck!

Thank you! Than you! straight to the point, clear explanation and fantastic links to support. I still fast forwarded a bit but that's on my attention span. I will use your links for the affiliate earnings to be received by you. Question. the area I want to paint is tiny. eyeballs. Can't I just slap some paint and be done? If not, am I better off finding non-spray primer and finishing coat or is it OK to spray these on the non-painted parts of PLA or ABS?

a§§hole for not making it free

listen i just make the greatest art in the world but also this post is lit so thanks for sharing because i'm working on 3D printing some gears and machines and things like that but if you ever need any art you know who to call: time 🔮

outstanding. clear. concise. easy to understand. thank you !

best tutorial i've seen for this

there's no "convert mesh" now, I suppose they want you to pay for it

What size is that box?

I really would like to get the cnc cad files. I’m in the gathering stage for a build. Super cool! Hope you have good luck on the thoes slabs there expensive